LPG-25 High Speed Centrifugal Spray Drying Machine
High speed drying. The surface area of Raw Material liquid increased a lot after atomization through nebulizer, 95%-98% of moisture will be evaporated in high temperature airflow in a flash, only needs seconds time.
Adopts Single position spray drying to make the liquid drop and hot air running in same position. Although the temperature of the air is high, the hot air contacts Liquid Drop once come into drying tank. So the temperature decreased at once to protect the material out of over heated. This is machine is also fit for the materials which are sensitive with Heating.
Because the drying is processed in a flash, so the finished product is Ball Shape with good mobility and good solubility.
The machine is Simple production with easy operation control system used for drying 50-80% moisture contained materials, even some special material with 90% moisture contained can be dried in a flash to powder. Most of the materials no need to be pulverized or sieved again after dried.
All contact parts are made in SS304. for easy checking and operating purpose, all of the controllers and lights are equipped in one controller.
Main technical Data:
Method of Atomizing
High Speed Centrifugal Atomizer (mechanical drive or stepless frequency speed regulation is available)
Revolution of atomizer(rpm)
Diameter of Atomizing disc (mm)
Dried Powder Recovery Rate (%)
Length of Covered Area(m)
Width of Covered Area(m)
Hoisting height of Nozzle(m)
Air input Temp
Air output Temp
Notes: The evaporated amount of moisture is contingent upon the characteristics of the raw material, solid content and temperature of hot air at inlet and outlet. Customers can choose the heating method according to the conditions of the local energy source.