CE Hemp Oil Extraction Machine , Essential Oil

This equipment can be used for herbal. Plant, food's decoction, warm soaking, heat reflux, forced circulation, permeability percolation, aromatic oil extraction and organic solvent recovery process under atmospheric pressure or pressure. It has advantage of high efficiency and easy operation. Therefore,it is widely used in pharmaceutical,food, chemical and other industries. This equipment's extraction technique can choose straight cylinder, cone, oblique cone, mushrooms and other forms.
Chat Now

Product Details

LTN-Series High Efficiency Ganoderma Grape Seed Ginkgo Ginger Extraction Machine


Product Description:

This equipment can be used for herbal. Plant, food's decoction, warm soaking, heat reflux, forced circulation, permeability percolation, aromatic oil extraction and organic solvent recovery process under atmospheric pressure or pressure. It has advantage of high efficiency and easy operation. Therefore,it is widely used in pharmaceutical,food, chemical and other industries. This equipment's extraction technique can choose straight cylinder, cone, oblique cone, mushrooms and other forms.


Application:

High efficiency extraction and concentration unit for herbs is mainly used for extraction, concentration, ointment receiving in such fields as Chinese herbal, animal, and plant, as well as for alcohol recovery and volatile oil extraction.

Features:

1) Great quantity of feeding materials. The quantity of feeding materials is one time greater than common distillation type.

2) Good technical adaptability. Water or alcohol solvent distillation in conditions of negative pressure, normal pressure and positive pressure, especially low-temperature distillation of heat sensitive materials can be made.

3) High rate of ointment-collecting. Because of the dynamic distillation of medicine the solute content in the medicine and solvent keeps high gradient, which increases the pushing force of lixiviation and increases ointment-collecting rate.lt can extract 5-20% more than normal method.

4) Saving solvent. Totally seal close-loop cycling.30-50%energy can be completed in one step,and concentration can be completed in one step, and re flux of this unit are greater by one time than common type. The period for whole procedure is only4-6 hours.

5) Low-energy consumption. Second-time steam is used as heat source.


6) Distillation and concentration can be made at one time. Temperature of reflux condensing liquids is nearly as same as boiling temperature in distillation tank.


Foaming polyurethane is used as the heat preservation layer, and temperature,degree of vacuum can be controlled automa-tically. In the unit, above 50% steam can be saved.


Main Technical Data:


ManufacturerChina LTPM Group Co., LTD
PN5L vacuum emulsifying mixer
CapacityDesign volume: 6L, working capacity:5 L
Kettle CoverLiquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp




Mixing pot


Material

Inner layer: SUS316L thickness: 3mm
Middle layer: SUS304 thickness: 2mm
Outside layer: SUS304 thickness:2mm


configuration

Bottom material exhaust, size: 1.5”
Temp. sensor (0-199℃)
Electrical heating: 2kw, cooling water inlet





Stirring system


Homogenizer

1.Material: SUS316L; standard homogenizer

2. Power: 1.1 kw/380/50Hz; RPM: 0--2800R/Min

Stirring scrap and middle stirringMaterial: SUS316L,Scrap material: PTFE

1. Stirring scrap and middle stirring use the same motor

2,Power:0.75 kw/380V/50Hz;RPM:0~86r/min(Frequency control)

3. Stirring scrap and middle stirring rotating the opposite direction 

Safety: 1. During stirring, the cover can not open, 2. Cover lift can not stirring.
Vacuum system

1. Vacuum pump: water recycle, power 0.37kw/380V/50Hz

2. With pressure sensor (during vacuum condition, hydraulic can not open)

Heating methodJacket electrical heating
Exhaust methodElectric doom and bottom discharge or positive pressure discharge material
PressurePressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa
Control boxSUS304 , 1.2mm thickness
Dimension1400mm×600mm×1900~2400 mm
Shelf is SS, platform with raised platform and SS guardrail
Spare partsOne year spare parts and tools
GuaranteeOne year
Using lifeMore than 15 years




Oil pot

Design volume3.35L
Working capacity2.7L
Stirring power0.025kw
Stirring speed1400 RPM
Heating power1 Kw


Water pot

Design volume3.35L
Working capacity2.7L
Stirring power0.025kw
Stirring speed1400 RPM
Heating power1 Kw


Machine Picture:



Hot Tags: ce hemp oil extraction machine , essential oil, China, suppliers, manufacturers, factory, price, made in China

Inquiry

You Might Also Like