Regular maintenance of packaging equipment

- Jul 26, 2018-

The blister packaging machine is a machine which forms a blister with a transparent plastic film or sheet and seals the product between the blister and the bottom plate by heat sealing, bonding or the like.

1 Prepare medicines, packaging materials, replace batch number template, install PVC and aluminum foil, check cooling water, and carefully clean equipment; 

2 Turn on the power supply, turn on the compressed air;

3 Press the heating button and adjust the heating and heat sealing temperature control table to the appropriate temperature;

4 Pull the PVC hard sheet through the channel to the punching knife and pull the aluminum foil under the heat sealing plate;

5 When the heating plate and the heat sealing plate are raised to a suitable temperature, adjust the cooling temperature meter to a suitable temperature (generally should be 30 ° C);

6 When the medicine is full of the blanking track, press the green button of the motor to open the empty car. After the blowing, heat sealing and punching have reached the requirements, press the vibrating button of the tablet and the planetary cloth switch;

7 When adjusting the blanking, make the blanking meet the requirements and carry out normal packaging;

8 After the package is finished, shut down in the following order: press the pill stop button - press the red button on the motor - the main unit stops - turn off the main power switch - close the intake valve - close the inlet valve. Then clean the machine and the site, and maintain the packaging equipment.