Keep The Whole Machine Clean And Hygienic, Avoid Washing The Host With Water

- Jul 26, 2018-

The capsule filling machine is used for filling capsules in health care products factories, small pharmaceutical factories, medical research units, hospital preparation rooms, specialist clinics, pharmacies, nourishing health products stores and the like.

Capsule filling machine has a fast filling speed and small size difference. This machine combines powder capsule shell finishing, capsule cap finishing and capsule set, which is compact and convenient. It is suitable for small and medium-sized batch production of small and medium-sized pharmaceutical factories, health care products factories, hospitals and clinics. For example, 2-3 sets are used at the same time, and it is suitable for mass production. It has the function of arranging and locking the capsule, which reduces the body and the floor space. It has the advantages of beautiful appearance, hygienic requirements, simple operation, convenient maintenance, low power consumption, economical and practical advantages; only one or two people are required to operate. No special training is required for the personnel; the capsules are arranged at a high speed, the drug loading is uniform, and the product qualification rate is high; when different types of capsules need to be replaced, only the corresponding capsule filling plate can be replaced; the most suitable for health care products factory, small pharmaceutical factory , pharmaceutical research units, hospital preparation rooms, specialist clinics, pharmacies, nourishing health products stores and other units for filling capsules.

1. This equipment is a vibration machine. Always check the tightening of the screws at each part. If it is loose, tighten it in time to prevent malfunction and damage.

2, plexiglass parts (workbench board, medicine board) should avoid direct sunlight and close to high temperature, do not put heavy objects, the medicine board must be placed vertically or flat to avoid deformation and damage.

3. The electrical enclosure and the fuselage must be grounded to ensure safety and the power is cut off after the work is completed. .

4. After the work is completed every day, the residual drugs in the machine and the mold hole should be cleaned to keep the machine clean and hygienic, and avoid washing the host with water. If the mold on the machine needs to be cleaned, the screw can be loosened and it can be taken down for easy installation.